Stone or rock is a naturally occurring solid aggregate of minerals. All stone types can be laser etched or engraved but each react differently to the laser and will need to be tested.
Laser cutting not achievable
It’s not possible to laser cut stone with Co2 laser machines. It is best to have it supplied to us pre-cut to size using a waterjet cutting service.
As a natural material, the laser reacts to types of stone differently depending on tone, density and hardness. In most cases the laser will produce a grainy recessed finish with little contrast to the stone surface. 3D engraving is also achievable using gray scale artwork. For us to establish the correct settings for your stone material, you will need to supply an additional sample to test.
Engraving stone produces stone dust that will need to be cleaned from the surface once you receive your job.
Variation in engraving
Please be aware that as a natural material, tone and hardness vary from piece to piece. This can have an impact on the appearance of the engraving if producing multiple engravings. Variation in tone can also affected by power distribution if you have artwork that varies in size.
On some stone materials larger depths of between 2mm-3mm are possible. For this to be achieved, the laser has to run very slowly and using multiple passes which makes the job costly to process. Deeper engraving also produces a lot more dust particles that will need to cleaned from the surface.
If deeper engraving is required, we recommend that positive portions of your artwork (i.e the white areas of your artwork – the inverse of what’s being engraved away) be no less the 2mm in thickness. If any less the engraving will tend to become quite fragile and can break easily when handled.
Your supply for laser engraving only. We don’t hold stock of any stone material, you will need to supply.
Thickness: Machine holds any thickness up to 330mm
Sheet size: Max engrave area is 1246×710mm.
Max weight: 30kg
Drawing templates are not currently available for this material. Draft your file so that your art board matches the size of your stone slab(s).
See the drawing guidelines for more on setting up a file for engraving
See more on laser engraving stone
Laser Cut Fabric specializes in a wide array of laser cutting for various types of applications like swim suit, decorative
For engraving glass with the laser, drinking, wine or beer glasses or bottles are clamped into a rotary attachment. It is thus pos
Another plus of leather laser cutting services in Delhi ncr is the clean and sealed cutting edge it produces. There
Lasers are particularly well suited for realizing even the finest geometries with maximum precision and quality. A cutting plotter cannot fulfill t
How does it work?
When u allow a Laser beam to emit through a laser tube & current will pass through it, Then it ref